Another Sillidar...

So, after thinking that my original Sillidar was some kind of assemblage, a couple of months later this watch came up on eBay. The pictures were terrible so no interest and I won with a single very low bid (less than £10 IIRC). I wasn't exactly sure what I was going to receive, other than a cheap West End watch, so I was somewhat surprised to open the package and see it was almost identical to my first Sillidar.

Clearly the dial is a different style to the first and it has a different crown but in all other respects it is identical. The serial number however is over 100,000 higher, so presumably quite a bit later.

I don't know at what point plastic glasses began to be used but the one fitted here very closely matches the curve of the case so I'd like to think that it may be the original.

I actually prefer this dial to my other one and it keeps very good time, even without servicing, but it really needs a new glass and the lume in the numbers is very much worse for wear.

The case is again some alloy I can't identify but there is quite a lot more of the original surface left than on the other. It looks very much like gilt.

This crown is ridiculously fiddly to wind. It looks slightly better than the other version but it no where near as practical. I don't know if it's original or not, but I have seen other watches about this age with this slim style.

Update 15/08/2012 -  I took this apart to clean it. Unfortunately it's been used as a practice piece I think and the movement is covered in scratches and full of gunk. For reasons I can't see the teeth in one quarter of the centre wheel are very worn. Perhaps something was stuck in there once? One of the banking pins is also bent. It's amazing it's keeping as good a time as it is!

Update 6/09/2012 - Cleaned, re-glassed and re-lumed. The lume on the dial must have been printed on. As soon as I can work out a way to do that I will.

Update 10/04/2014 - I recently acquired a watch timing machine and properly adjusted this watch. More by luck than judgement I'm sure but it now keeps time to within a few seconds a week being worn daily. I am astonished that a watch that is nearly 100 years old and (as far as I know) has had no major work carried out on it is capable of such accuracy and consistency. This movement is noticeably better finished than most of the watches I own, eg the winding wheels are polished to a mirror finish and the whole movement is gilted, so I assume this is one of the higher end models of the period. I'm very impressed.

The First Watch

The first watch, and the one that started it all, is also the watch I wear daily...

It's a Sillidar wristwatch, (nicely serviced by Ryte Time watches) with no features more fancy than a sub-second dial. It just tells the time. It cost me about £15 on ebay.

Serial number: 3390261

It has engraved (actually more scratched) on the back, above the serial number: J.G.L 31-5-1945 (a couple of weeks after VE Day). Inside the caseback is stamped "W6225B" (and of course "EVERBRIGHT STEEL BACK"). The movement is sign with the W inside a 6 pointed star inside a double circle. Somewhat surprisingly for a watch this age there are no servicing marks.

At first glance this would seem to date it quite accurately, but some of the features make me think it's perhaps a quite a bit earlier than this.

First of all the inscription is really rough and appears just scratched in. If you'd just bought a brand new (fairly pricey) watch you would at least pay a little extra to get the jeweler to engrave it properly, not scratch it in with a nail when you got home.

Second, it doesn't have Incabloc shock protection. One of West End's claims to fame is that they were the first company to put Incabloc into mass production, and this happened in the late 1930's. The Sillidar was (I think) one of their higher end models and you would have thought more likely to get the better features sooner.

Thirdly: there is no jewel count marked on the dial. It's 15 jewels (or less, I've not taken it apart). A watch of 1945 vintage should have had at least 17 jewels.

Lastly, it has a proper enamel dial. From what I can find these had almost died out by WWII, being too time consuming to produce. However somewhat bizarrely, if you look carefully at the pictures above, you can see that the sub-second dial has been ground out (a common practice to give enough clearance above the second hand) over an existing sub second dial that was apparently slightly off centre. Given this I began to think it was probably an assemblage of some kind and the dial did not belong to this movement, with the sub seconds added afterwards. However on reflection that doesn't make much sense either: it's clearly a West End dial on a West End movement of about the same age, and the figures on the sub-second dial are baked into the enamel with everything else so it was clearly done deliberately at production time. Weird. Perhaps they were using up old dials that were meant to go on slightly different calibres? Perhaps it's a one off? What we really need are more examples...

Anyway, my educated guess then is around about late 1920s - early 30s. However, I'm not very confident in this, hence this whole project!

Update 15/8/2012 - I notice this is the only watch I've seen to have a suffix on it's "case number". I wonder if "B" is B quality. Might explain the sub-second dial.